Hey guys you knew it was coming......Ballistic Knives!
Now with all the time on my hands last night i was able to construct a ballistic out of a fury fire barrel, reflex plunger tube and spring, glue stick cap, mini camping steak(hold things up) and a paper clip.
Here is the guide to make one.
1. Get materials similar to the ones listed above.
2. Take your biggest tube(mine is the fury fire barrel)
3. Put a paper clip around the bottom of the spring and then put spring into tube. This willl keep the spring from firing out along with the blade
4. Get cap of some sort(glue stick cap for me) and wrap it in tape until it sites snug at the bottom
of the bigger tube. This will keep the spring in the tube.
5. Make Blade. Tape or glue your blade to a smaller tube(that fits in the large tube)
6. Make trigger mech/ firing mech (what i did was cut a slit in the large tube at the top and a slit in the smaller tube in the bottom. Then i put a "pin" through both holes when loaded and when i pull the pin the blade shoots.
Then this morning i made a 2.0 made from a toy knife blade, plastic tube from the inside of a recon barrel attatchment, a spring, a marker cap, and a glow stick.
This was made the same way as my 1.0 knife
1.0 was designed to be a big heavy ballistic knife while the 2.0 is lighter and thin compared to 1.0
1.0 gets aroung 20-25 feet (tested today) and 2.0 gets 15-20 feet because of its stealth mode and size.
All i did was dig around my parts bin and put this all together so go crawl in your parts bin and pull something cool out!
Questions or comments hit me up at lilevan@live.ca
No comments:
Post a Comment